Floor pan replacement

sab12373
- Share
- Tweet
#1

Floor pan replacement

12-15-2003, 09:07 PM

I am in the middle of replacing the driver/passenger side floor pans and door rails and the body mounts. Due to extensive rust I had to remove the entire floor and door rail. I know that this is a fairly common job and I am wondering if anyone has any photos showing how everything is supposed to go together.

Thanks
Tags: None
Eagle-Mark

Senior Member

Join Date: Dec 2002

Posts: 4251
- Share
- Tweet
#2

12-15-2003, 09:33 PM

Bill Cummings did a nice write up on that here:
http://home.comcast.net/~william.cummings/

[CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!

1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!

1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!

[SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
[B]May be all you need to know about EFI![/B]

and I still help local JustIH members (for fun) free! :cool: [/CENTER]
Comment

Announcement