Announcement

Collapse
No announcement yet.

wrangler springs,3/4ton axels

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wrangler springs,3/4ton axels

    i just found a set of chevy 3/4ton axels for my scout, and wanted to put them under the scout using stock wrangler springs and humvee wheels. the reason for the stock wrangler springs is i wanted to do a springover and my scout has skyjacker 4" springs on it right now. please give your opinyion i know its kinda out there but it would be different.......thanks...mort

  • #2
    Scout II springs are easy to get and inexpensive so why bother?
    Skyjacker four inch over springs are easy to sell. I'll buy them and I already have a set...
    I have no idea what you will have to go through with wrangler springs.
    Check out Eric's web-page, he has done the conversion you speak of.
    http://www.justinternationals.org/erickincel.htm

    [CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!

    1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!

    1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!

    [SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
    [B]May be all you need to know about EFI![/B]

    and I still help local JustIH members (for fun) free! :cool: [/CENTER]

    Comment


    • #3
      the scout II springs eem so small and i've had nothing but problems with them sagging, and the rear tires almost hit the front of the rear fender and i only ru 33's. if i used the stock scout springs i would need to build some kind of traction bar..any ideas? Does eric get any tire rubbing when flexing?i really like the way it looks...thanks mort

      Comment


      • #4
        Well the 3/4 ton axels need to come sooner than later i just sheared all the ring gear bolts off and toasted my ARB.....****ty day! i'm in the process of getting the stock scout springs and gettiing ready to instal...hope all goes well

        Comment

        Working...
        X