No announcement yet.

XLC springs?

  • Filter
  • Time
  • Show
Clear All
new posts

  • XLC springs?

    are there any distigushing marks or anything on xlc springs? i have a set i want to put the rear on my scout because my rear is saggin' but i don't want to take my current springs off to find out if they are xlc springs

  • #2
    I don't know how to answer your question sure someone else will.

    But look around and the XLC Scouts are sagging just like the rest after some 25 - 30 years. so why bother?

    How about a new center pin and add a leaf from the other springs or buy an add a leaf kit.
    [CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!

    1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!

    1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!

    [SIZE=3][B][URL=""][/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
    [B]May be all you need to know about EFI![/B]

    and I still help local JustIH members (for fun) free! :cool: [/CENTER]


    • #3
      ok i think i might just get some add a leaf's in the rear how much lift will that give? i want to do what todd has done minus the 2 inch body lift i just want to replace the old body bushings with poly

      that would give around 1-2 inches don't ya think?