Announcement

Collapse
No announcement yet.

Radiators

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Radiators

    Awhile back there was a place you could get an aluminum 3 row radiator for a Scout II for $225. plus shipping but I can't remember who it was?
    Or dose anyone have a good source?
    [CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!

    1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!

    1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!

    [SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
    [B]May be all you need to know about EFI![/B]

    and I still help local JustIH members (for fun) free! :cool: [/CENTER]

  • #2
    Just an FYI, stay with the three row. I switched to a four row high efficiency. I hate it, not enough air flow. Just and FYI.

    Joe

    Comment


    • #3
      Radiator

      One other issue with the 4 core:
      There may not be enough room to run a fan clutch. I have a Hugh's 4 core, which I like, but I had to remove the fan clutch to (1) position the fan correctly in the shroud so that it draws air, and (2) so that there was enough clearance between the fan and radiator to be able to fit a fan belt.

      Without the clutch, the fan draws great and there is plenty of room to fit, or remove, the belts.

      Mickey

      Comment


      • #4
        Thanks for the heads up so now where to get a new three row?
        [CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!

        1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!

        1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!

        [SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
        [B]May be all you need to know about EFI![/B]

        and I still help local JustIH members (for fun) free! :cool: [/CENTER]

        Comment


        • #5
          Any good shop should be able to build one. I had mine built you'll need the tanks off a good old one. Just shop around

          Comment

          Working...
          X