Tweet
72 Scout II
I have a 72 scout II that is getting a large suspension lift. 4" leafs, reverse 2" shackle lift, SOA conversion, and 37" tires. My question is what power plant should i use, I have 2 345 c.i. motors that are strong, and a strong 350 c.i. I was also told that the Caddy 505 c.i. are a great motor to use, any sugestions?:confused:
-
-
Have herd the Cady conversion is a nice engine, but I am kinda parshal to keeping IH in IH, so what about building a IH-392? Could do some sick stuff with it if you are building it from the ground up. Just my own opinion.
Mark -
345 would be plenty of motor, good bottom end, bolt right in and they are paid for!
Just get your gearing right for those big tires...[CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!
1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!
1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!
[SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
[B]May be all you need to know about EFI![/B]
and I still help local JustIH members (for fun) free! :cool: [/CENTER]Comment
Comment