Announcement

Collapse
No announcement yet.

distributor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • distributor

    Can the distributor out of a 4.3 be converted over to IH or does it have to be the v8 chevy? Its out of a 1988 s10 I want to convert it to IH Can it be used with a new reluctor ? this question is for eagle mark or bill usn

  • #2
    If you are referring to Marks conversion that grafts the top of the GM on the bottom of the IH dist, then the answer would be no.
    Unless you were going to put the V8 pickup parts in it. Then there would be no reason to use the V6 dist. Just pick up a V8 dist in a local auto mall.

    Sorry.
    Bill USN-1

    COMMITED TO TEACHING PEOPLE THE "PROPER" WAY TO EFI
    HAMILTON FUEL INJECTION
    May be the answer to all your fuel injection needs!
    Learn to do it right.

    Comment


    • #3
      Yup! What he said!

      Trying to buy a eight cylinder reluctor from Chevy comes as one piece shaft and reluctor at $86.
      [CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!

      1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!

      1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!

      [SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
      [B]May be all you need to know about EFI![/B]

      and I still help local JustIH members (for fun) free! :cool: [/CENTER]

      Comment


      • #4
        distributor

        That figures Thanks

        Comment

        Working...
        X