Announcement

Collapse
No announcement yet.

Will this TBI work?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Will this TBI work?

    Just saw this for sale and I had heard of a 2" TBI but havent heard of a 2 1/16"
    Wondered if this would hook up to the same computer? If would it work well with a 392?

    Just curious

    Alan C

    sorry dont know how to post the pic


    This is a stock replacement for Rochester throttle bodies, made by Holley will outflow and outrun the stock Rochester. Part# 80405 on the throttle body, according to holley this crosses over to a 502-6. Throttle bore measures 2 1/16. Its a new throttle body and comes with IAC valve and TPS sensor and injectors with built in regulator. Should bolt on to Tahoes and Chevrolet Trucks.

  • #2
    Don't know about 2 1/16 but They will work. I only know them as 2"

    EBAY

    I think is a better deal.
    Take your current throttle body and pull all the parts off and bolt them on this TB. Gives you the 2 in TB for a lot less.
    And it's offered from the sponsor!! If you are already running then your current injectors are fine. You can make this work on any motor. 304/345/392...ask me how I know!
    ebay AFI upgrade
    Bill USN-1

    COMMITED TO TEACHING PEOPLE THE "PROPER" WAY TO EFI
    HAMILTON FUEL INJECTION
    May be the answer to all your fuel injection needs!
    Learn to do it right.

    Comment

    Working...
    X