Tweet
Here it is! The Do IT Yourself Kit from Affordable Fuel Injection. Looks great! Can't wait!
I let you know how it goes...
I let you know how it goes...
Attached Files
-
[CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!
1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!
1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!
[SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
[B]May be all you need to know about EFI![/B]
and I still help local JustIH members (for fun) free! :cool: [/CENTER] -
Distributor is in !
Got that done today, wires are almost done now too!Attached Files[CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!
1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!
1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!
[SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
[B]May be all you need to know about EFI![/B]
and I still help local JustIH members (for fun) free! :cool: [/CENTER] -
-
I thought you were going the WHOLE chevy efi route. Thats cheating!!! But we will let you go this time. I likey the aluminum adapter plate. Congrads!! Hope it all goes well!!! Have fun.My "Disasterpiece"
1970 800A 4X4,HFI'd,304,B/W,27,44,3:73,28's.
The rest are in my 25 year plan!
My "Ruedh"
FREE 1972 1110 4x4,V8(?)727,205,44 drum/60/3.54's,small cheap tires.
LOOOOADS-O-RUST!! Donor body located. Not!! JY owner played the "crusher value" card. : angry:
NON-working rear window. Need info!!!
www.northtexasbinders.comComment
-
willthat kitwork on a 304...if you dont mind how much was it?Comment
-
Yes there is a kit for the 304. It's the same GM system we have been working on here. It's just all the hard work is done.
This kit I got was from Affordable Fuel Injection, watch for the banner ads here on our site. They give us a special price of $395 which includes a wiring harness, adapter plate, fuel pump, custom calibrated chip, 02 bung, throttle body gasket, check engine light, fuel pump relay, power relay, fuel line fittings, instructions and tech support! You still need things like ECM, throttle body, sensors etc... For the do it your self-er it is quite a deal.
They also have full kits with computer, throttle body etc...
http://www.affordable-efi.com/[CENTER]1994 Buick RoadMaSSter Estate Wagon LT1/4L60E. White and Woodgrain Sleeper...PCM 16188051 With SS/V4P/Custom Tune! WOT 12.9 AFR!
1990 Chevy Suburban Silverado 5.7L 2wd ECM 1227747 HiWay Lean Cruise 18.5 MPG and 12.5 to 1 AFR at WOT!
1972 IH 1210 Isky Cammed Balenced 345 4 speed PCM 16197427 Project!
[SIZE=3][B][URL="http://www.gearhead-efi.com/"]GearHead-EFI.com[/URL] EFI Conversions and Chip Tuners![/B][/SIZE]
[B]May be all you need to know about EFI![/B]
and I still help local JustIH members (for fun) free! :cool: [/CENTER]Comment
-
thanks think that is going to be my next projectComment
-
One thing to add. Don't forget about the dizzy conversion thats needed to complete the efi swap. Can't wait for Eagle-Marks write up on this gm/IH dizzy work. Good luck to all!!
P.S. Anyone heard from Bill?My "Disasterpiece"
1970 800A 4X4,HFI'd,304,B/W,27,44,3:73,28's.
The rest are in my 25 year plan!
My "Ruedh"
FREE 1972 1110 4x4,V8(?)727,205,44 drum/60/3.54's,small cheap tires.
LOOOOADS-O-RUST!! Donor body located. Not!! JY owner played the "crusher value" card. : angry:
NON-working rear window. Need info!!!
www.northtexasbinders.comComment
Comment